24
8.2.3 Alarm enable: EnbL
This function allows the alarm to be enabled or
disabled without altering any of the alarm
parameters. To check or change the function
select 'EnbL' from the alarm menu and press
P
which will reveal the current setting. The
function can be changed by pressing the
Up
or
Down
button followed by the
E
button to return
to the alarm menu.
8.2.4 Type of alarm: tYPE
This function conditions the alarm to operate on
the rate or total display. Alarm 1 and Alarm 2
may both be conditioned as rate or total alarms,
or one may be conditioned for rate and the other
for total.
To check or change the type of alarm, select
'tYPE' from the alarm menu and press
P
which
will reveal the current setting. The function can
be changed by pressing the
Up
or
Down
button
followed by the
E
button to return to the alarm
menu.
Note:
To prevent accidental conditioning the
alarm must be re-enabled after the alarm Type
has been changed.
Fig 12 Alarm programme menu
