BEKA BA368C, Manual

Page: 51 / 93

51
Display Description of function
‘AcSEt t’ Access Set Time
Sub-menu that enables the timer
setpoint ‘Set t’ to be adjusted from
the display mode. A separate
security code prevents
unauthorised access.
See section 3.5.7
'uP or dn' Direction of count
Determines whether the timer
counts from zero upwards, or from
the set time setpoint Set t
downwards.
See section 3.5.8
‘dISPLAY.2’ Lower display (Set t)
Turns the lower display, which
shows the timer setpoint ‘SEt t’, on
or off.
See section 3.5.9
‘ContinuE’ Continue cycle
Determines how the timer powers-
up after a power supply
interruption. When ‘OP.OFF’ is
selected, both optional control
outputs will be open. When
‘OP.rEStOr’ is selected, both
control outputs will be returned to
their status when power was
removed. After power restoration
the timer will always return in the
stopped condition.
See section 3.5.10
‘LOC-rSEt’ Local reset
When turned ‘On’ the timer may be
reset from the display mode by
simultaneously operating the
Up
and Down push-buttons for at least
two seconds.
See section 3.5.11
‘CLr.Gtot’ Resetting grand total time
This function resets the grand total
time to zero when ‘CLr YES’ is
selected, and ‘SurE’ is entered to
confirm the instruction.
Note: Once cleared, a grand total
time can not be recovered.
See section 3.5.12
Display Description of function
'COdE' Security code
Defines a four digit numeric code
which must be entered to gain
access to the programmable
functions. Default code 0000
disables the security function and
allows unrestricted access to all
programmable functions.
See section 3.5.13