background image

1

Electronic Counter

H7CL

DIN 48 x 48 mm LED Counter with
IP66/NEMA 4 Protection for a Wide
Variety of Applications

Water- and dust-protected for severe environ-
ments.

Large, high-visibility LED displays.

Simple setting with Increment and Decrement
Keys.

Conforms to EMC standards.

Conforms to IEC standards, and approved by UL
and CSA.

Six-language instruction manual provided.

RC

Ordering Information

Outputs

Control power supply

Model

Without Shock Prevention Cover

With Shock Prevention Cover

Contact output

100 to 240 VAC

H7CL-A

---

12 to 24 VDC

H7CL-AD

H7CL-AD-500

Transistor output
(Ph t

l )

100 to 240 VAC

H7CL-AS

---

a s s o ou u

(Photocoupler)

12 to 24 VDC

H7CL-ADS

H7CL-ADS-500

 Accessories (Order Separately)

Name

Model

Soft Cover

Y92A-48F1

Hard Cover

Y92A-48

Shock Prevention Cover
(for DC models only)

Y92A-48T

Back Connecting Socket for flush mounting
(for AC models only)

P3GA-11

DIN Track/Surface Mounting/Front Connecting
Socket (for AC models only)

P2CF-11

Rubber Packing (see note)

Y92S-29

Flush Mounting Adaptor (see note)

Y92F-30

Note:

Supplied with each Unit.

 Model Number Legend

H7CL-A

jjj

1

2

3

4

1.

Fixed

2.

D: DC input

3.

S: Transistor output

Summary of Contents for H7CL Series












Reviews: