BEKA BA317NE, Manual

Page: 32 / 40

The revised security code will be activated when the
Tachometer is returned to the display mode. Default
security access code 0000 will disable the security
code allowing direct access to the setpoints in the
display mode by pressing the
(
and
*
buttons
simultaneously.
Please contact BEKA associates sales department if
the security code is lost.
9.4.14 Adjusting alarm setpoints from the
display mode
Access to the two alarm setpoints from the
Tachometer display mode is obtained by operating the
(
and
*
push buttons simultaneously as shown in
Fig 15. If the setpoints are not protected by a security
code the alarm setpoint prompt
5P1.5peed
or
5P1.Hour5
will be displayed depending upon whether a speed or
run-time alarm has been configured. If the setpoints
are protected by a security code,
CodE
will be
displayed first. Pressing
(
again will allow the alarm
setpoint security access code to be entered digit by
digit using the
&
or
*
buttons to adjust the flashing
digit and the
(
push button to move control to the
next digit. If the correct code is entered pressing
)
will then cause alarm setpoint prompt
5P1.5peed
or
5P1.Hour5
to be displayed. If an incorrect security
code is entered, or a button is not pressed within ten
seconds, the instrument will automatically return to the
display mode.
Once within the menu pressing the
&
or
*
buttons
will toggle the display between the two alarm
setpoint prompts
5P1
x and
5P2
x.
To adjust an alarm setpoint select
5P1
x or
5P2
x and
press
(
which will reveal the current setting. The
flashing digit of the setpoint may be adjusted using
the
&
or
*
push button and the
(
button to
transfer control to the next digit. When the required
setpoint has been entered, pressing
)
will return
the display to the
5P1
x or
5P2
x prompt from which
the other setpoint may be selected, or the instrument
may be returned to the display mode by pressing
)
again.
Note: Direct access to the alarm setpoints is only
available when the menu is enabled - see
section 9.4.13
Fig 15 Setpoint adjustment from the display mode
32