BLADE TIGHTENING BUTTON:
TIGHTEN THE
BLADE.
TOP CLAMPING
SELECTOR(OPTIONAL):
THIS OPTION
IS FOR TIGHTENINK THE MATERIAL
VERTICALLY FOR BUNDLE CUTTING
DOWN FEED SPEED ADJUSTMENT:
ADJUST SPEED
ACCORDING TO HARDNESS OF MATERIAL TO BE
CUT. WHEN BLADE BECOMES BLUNT CHOOSE A
LOWER SPEED TO HAVE A BETTER CUT.
ANGLE DISPLAY
: DISPLAYS THE
POSITION OF BOW IN DEGREES
BETWEEN 0° AND +60°
The indicator of manometer must be in the green area (area ii). If the indicator is in one of the red area, this means that t he
tension of the blade is not in the acceptable level and it may cause unwanted results.
Area ı : this shows that the tension of the blade is less than it must be. Adjust the blade tension.
Area ıı : this shows that the tension of the blade is normal
area ııı : this shows that the tension of the blade is more than it must be. This may break
the blade. Reduce the tension.
HYDRAULIC VICE:40 BAR
HYDROMECANIC BLADE TENSION:300 BAR
HYDRAULIC BLADE TENSION:40 BAR
MAIN MOTOR:40 BAAR
