Operation
Operating manual NORA Pro
V0.1 E
Page 34 of 60
8.5 Operation of the sit-to-stand lift
The spreader bar and the carrier frame of the NORA sit-to-stand lift are operated by
means of the control panel or the hand control, which is included in the delivery. The
direction of motion is indicated by symbols.
Rising and
lowering of the
spreader bar
Buttons of the hand
control
Buttons of the control
panel
Keep the button
of the hand control or the control panel
pressed to raise the spreader bar. The spreader bar is raised.
Release the button as soon as the spreader bar has reached the
desired position. The upward movement of the spreader bar is
stopped.
When the highest possible position is reached, the upward
movement is automatically stopped.
Keep the button
of the hand control or the control panel
pressed to lower the spreader bar. The spreader bar is lowered.
Release the button as soon as the spreader bar has reached the
desired position. The downward movement of the spreader bar is
stopped.
When the lowest possible position is reached, the downward
movement is automatically stopped.
Display
maximum
weight
When the LED display next to the weight symbol of the hand control
lights up, the maximum possible lifting weight of the NORA sit-to-
stand lift has been reached. The weight symbol with the signature
"Overload" also appears on the display on the control unit.
In such case, lower the patient and use another sit-to-stand lift
with a higher load capacity.
Spreading the
carrier frame
Buttons of the hand
control
Buttons of the control
panel
Keep the button
of the hand control pressed to spread the
carrier frame. The chassis of the sit-to-stand lift is spread. Release
the button as soon as the desired spread width is reached. The
spreading movement is stopped. When the maximum spreading
position is reached, the movement is automatically stopped.
Keep the button
of the hand control pressed to close the carrier
frame. The chassis of the sit-to-stand lift is fold. Release the button
as soon as the desired spread width is reached. The spreading
movement is stopped. When the minimum spreading position is
reached, the movement is automatically stopped.
The spreadable chassis highly increases the stability of the sit-to-
stand lift.
Travel path
When using the NORA sit-to-stand lift, make sure that the travel path is not narrowed by
obstacles or other elements (e.g. wall racks, etc.).
Summary of Contents for 921077000
