Beka Hospitec 921077000, Original Manual

Page: 17 / 60

Operating elements and their function
Operating manual NORA Pro V0.1 E Page 17 of 60
7.2 Functions and connections of the control unit
7.2.1 Control panel
With the control panel you can move the lift arm up or down, as well as spread or close
the carrier frame. Pressing the buttons activates the function; as soon as you release
the button, the function stops.
The display shows a dynamic animation of the activated movement. On the left side of
the display are counters that record cycles of the up and down movement and the
exceeding of the maximum load. One minute of motor activation is counted as one cycle.
If no button is pressed for more than 2 minutes, the NORA Pro display switches off to
save energy. As soon as you press any button, the NORA Pro is activated again.
The control panel also provides information about the operating status of your NORA
Pro. The charge level and, if applicable, overload can be read as described below.
3 bars: Battery is full, no charging required (remaining capacity >75%).
2 bars: Battery is at least half full and can be charged (remaining capacity
>55%).
1 bar: Battery is almost empty and must be charged (remaining capacity
>25%).
No bar: Battery is almost empty and must be charged urgently (remaining
capacity <25%)!
In addition, the adjacent warning symbol appears in the display and a
signal sounds when a button is pressed.
The weight symbol appears in the display. Overload: The max. weight of
205 kg has been exceeded.
The symbol for internal charging appears in the display. The battery is being
charged inside the NORA Pro.
Functions
“Up” button
“Down” button
Spreading the carrier
frame
Closing the carrier frame
Max. weight reached
Battery charge status
Counters for lifting /
lowering operations