Beka Hospitec 921077000, Original Manual

Page: 31 / 60

Operation
Operating manual NORA Pro V0.1 E Page 31 of 60
5. Activate the brakes on the rear castors.
6. Tighten and fasten the two leg safety belts.
7. Raise the spreader bar to the required height to attach the sling to the sling
attachment points of the spreader bar.
8. Suspend the sling in the sling attachment points. Please check that the sling is
correctly attached (also refer to section 8.1.2.1 Safely suspending the clips in the
holder).
CAUTION
•
Check prior to lifting that all clips or loops are correctly fixed to the
spreader bar.
•
Make sure that the patient seizes the handles provided to that
effect with both hands.
•
Make sure that no one grabs in the hazardous areas (bracket,
carrier frame) during the adjustment procedure. - Risk of crushing.
•
Check before and during the height adjustment procedure that
your feet are not located in the area of the castors or in the
resident’s area.
9. You can now raise the patient/resident.
CAUTION •
Do not stand between the sit-to-stand lift and an obstacle during
the transfer procedure.
•
During the movement of the sit-to-stand lift, the carrier frame must
be closed.
10. The steering of the NORA is enhanced when the carrier frame is not spread.
11. Release the brakes to transfer the patient/resident.
Imag
e 3