Beisler 100/68, Operating Instructions Manual

Page: 87 / 162

Parallelism of the carriers 1 to the fabric sliding sheet
–
Loosen screw 3.
–
Turn holder 2 in such a way that both carriers 1 have the same
distance to the fabric sliding sheet.
Height of the carriers 1 as to the fabric sliding sheet
–
Loosen counternut 5.
–
Turn the piston rod in such a way that there is a distance of approx.
0.5 mm between the lowered carriers and the fabric sliding sheet.
Adapting the carriers 1 to the seam distance
The carriers are adapted to the seam distance by bending.
–
Align the carriers cautiously by lateral bending.
Front adjustment of the carriers
The carriers are positioned correctly if there is a distance of approx. 2
mm between the rotary disc 6 of the scissors and the guide rail 7 in the
front end position of rail 7.
–
Push the guide rail 7 right to the front.
–
Loosen screws 8.
–
Adjust the guide rail in such a way that there is a distance of
approx. 2 mm between the rotary disc 6 of the scissors and the
guide rail 7.
–
Tighten screws 8.
Carriers of the guide rail
The buffers 10 of the carriers have to be extended by the cylinders 9
so far that the guide rail is transported without slippage.
The distance between the buffers 10 of the carriers should be narrower
than the thickness of the guide rail.
–
Unscrew cylinder 9.
–
Adjust the piston rods of the cylinders correspondingly.
–
Screw cylinder 9 on again.
47
3