background image

INSURANCE.  This  device  is  insured  by  the  SOCIETÀ  REALE  MUTUA  for  the  PRODUCT'S  GENERAL  LIABILITY
up to a maximum of 1,500,000.00 EURO against damages caused by the device in case of failures in functioning.

WARRANTY.  The  warranty  term  is  3  years  from  manufacturing  date,  in  agreement  with  the  following
conditions.  The  components  acknowledged  as  faulty  will  be  replaced  free  of  charge,  excluding  the  replacement
of  plastic  or  aluminium  cases,  bags,  packing,  batteries  and  technical  reports.
The  device  must  arrive  free  of  shipment  charges  to  BEINAT  S.r.l.
Defects  caused  by  unauthorized  personnel  tampering,  incorrect  installation  and  negligence  resulting  from
phenomena  outside  normal  functioning  shall  be  excluded  from  the  warranty.
BEINAT S.r.l.  is  not  liable  for  possible  damage,  direct  or  indirect,  to  people,  animals,  or  things;  from  product
faults  and  from  its  enforced  suspension  of  use.

DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT.
This  symbol  on  the  product  or  its  packaging  to  indicates  that  this  product  shall  not  be  treated  as  household  waste.  Instead,
it  shall  be  handed  over  to  the  applicable  collection  point  for  the  recycling  of  electrical  and  electronic  equipment,  such  as  for
exampl e:
-  sales  points,  in  case  you  buy  a  new  and  similar  product
-  local  collection  points  (waste  collection  center,  local  recycling  center,  etc...).
By  ensuring  this  product  is  disposed  of  correctly,  you  will  help  prevent  potential  negative  consequence  for  the  environment
and  human  health,  which  could  otherwise  be  caused  by  inappropriate  waste  handing  of  this  product.  The  recycling  of  materials
will  help  to  conserve  natural  resources.  For  more  detailed  information  about  recycling  of  this  product,  please  contact  your  local
city  office,  your  household  waste  disposal  service  or  the  shop  where  you  purchased  the  product.
Attention:  in  some  countries  of  the  European  Union,  the  product  is  not  included  in  the  field  of  application  of  the  National  Law
that  applies  the  European  Directive  2002/96/EC  and  therefore  these  countries  have  no  obligation  to  carry  out  a  separate
collection  at  the  “end  of  life”  of  the  product.

BE- V1bd1 1  5 19

 IP66

Made in Italy

BEINAT S.r.l.
Via Fatebenefratelli 122/C 10077, S. Maurizio C/se (TO) - ITALY
Tel. 011.921.04.84 - Fax 011.921.14.77
http:// www.beinat.com

Lo styling è della  b & b design

S

tamp and signature of the dealer

Purchase  date:

Registration number:

The  Beinat  S.r.l.  following  the  targhet  to  improve  its  products,  reserves  the  right  to  modify  the  technical  features,  aesthetic  and
functional  any  time  without  prior  notice.

Sensor

 SGM595/A

Business - [email protected]
Help Desk - [email protected]

Summary of Contents for SGM595/A









Reviews: