Beijing Starfire Control Technology Co.,Ltd.
北京斯达峰控制技术有限公司
Model SF-2012AH-QG
Cutting Machine
（
C002
）
10
4
）
G00 Quick Move
This command can move the cutting torch quickly to a designated position. In the event of two axial movements,
the cutting torch will move along a straight line from the origin point to the end point
at the speed of the
maximum speed limit multiplied by multiplying factor
. G00 movement is subject to speed multiplying factor.
Format:
G00 X[U]n Y[V]n
or
G00 PPn
5
）
G01: Linear Cutting Command
This command makes the torch cut to a designated position along a straight line. As machining movement
command, it allows uniaxial or biaxial linear interpolation movement. The feed speed is designated by F
command.
Format:
G01 X[U]n Z[W]n [Fn]
or
G01 PPn
[Fn]
+
Y
+235
+95
+80
+200
+
X
例：G92 X0 Y0
G00 X200 Y95
G01 X80 Y235
Current Torch Position
Expected Torch Position
6
）
G02/G03: Circular Cutting Commands
This command is used for circular interpolation, including clockwise circular cutting command G02 and
counterclockwise circular cutting command G03. See the figure below for the setting of directions.
Format
：
G02[03] X[U]n Y[V]n In Jn [Fn] or
G02[03] X[U]n Y[V]n Rn [Fn]
G02[03]PPn In Kn [Fn]
or
G02[03] PPn Rn [Fn]
