Beijing Starfire Control Technology Co.,Ltd.
北京斯达峰控制技术有限公司
Model SF-2012AH-QG
Cutting Machine
（
C002
）
10
a)
Press the green [START] key on the front panel.
b)Press an external "START" key(See the definition of input/output ports).
3.4. Control and adjustment of cutting position in automatic mode
3.4.1 Only the following keys are enabled when the system starts automatic mode:
1)[PAUSE]: If this key is pressed, the system will slow down and stop movement, shut off cutting oxygen(shut
off arcing switch in plasma machining case), turn off the height controller(M39) and remain the current
display still. After the system operation is paused, it is allowed to perform the following operations:
(a) Return along the original path; (b)adjust position; (c)exit machining operation; (d) [START]: restore
system operation; and
(e)Press [ESC] key to exit the machining program and return to automatic mode window.
2)
[F↑] and [F↓] speed adjusting key: To increase or decrease the multiplying factor of feed
speed.
3) [
Ｓ
↑] and [
Ｓ
↓] key: To control the vertical movement of cutting torch. By pushing and holding either key,
the cutting torch will move up or down accordingly, and the movement will stop if the key is released.
