Beijer Electronics X-Key 16, Manual

Page: 6 / 50

Safety Precautions
Beijer Electronics, MAEN827B
– The figures in this manual serves an illustrative purpose. Because of the many vari-
ables associated with any particular installation, the supplier cannot assume respon-
sibility for actual use based on the figures.
– The supplier neither guarantees that the product is suitable for your particular appli-
cation, nor assumes responsibility for your product design, installation or operation.
1.3 During Installation
– The product is designed for stationary installation on a plane surface, where the fol-
lowing conditions are fulfilled:
• no high explosive risks
• no strong magnetic fields
• no direct sunlight
• no large, sudden temperature changes
– Install the product according to the accompanying installation instructions.
– Ground the product according to the accompanying installation
instructions.
– Only qualified personnel may install the product.
– Separate the high voltage, signal and supply cables.
– Make sure that the voltage and polarity of the power source is correct before connect-
ing the product to the power outlet.
– Peripheral equipment must be appropriate for the application.
1.4 During Use
– Keep the product clean.
– Emergency stop and other safety functions may not be controlled from the product.
– Do not touch the keys etc. with sharp objects.
1.5 Service and Maintenance
– Only qualified personnel should carry out repairs.
– The agreed warranty applies.
– Before carrying out any cleaning or maintenance operations, disconnect the equip-
ment from the electrical supply.
– Clean the front cover with a soft cloth and mild detergent.
1.6 Dismantling and Scrapping
– The product or parts thereof shall be recycled according to local regulations.
– The following components contain substances that might be hazardous to health and
the environment: electrolytic capacitor.