GB
Controller
SV1-2-10Z
GB_SV1-2-10Z.DOC 1003
BEIER-Electronic
4
Safety-Technical Indications for the User
The following indications are for the purpose of personal safety of the operators, as
well as for the safety of the described products and the connected devices.
Non-observance may result in death, serious injuries of the body or damage to
property!
Warning!
Before opening the device
the mains plug must be disconnected.
•
Before setting the device into operation the accordance of the mains voltage of
the controller and the feeding device with the local mains voltage must be verified.
•
Set and connect plugs, plug link, slide switch according to technical description!
•
The set-up is to be carried out by technically qualified personnel!
•
Only
inductive loads may be connected to the controller!
•
Check the electrical equipment of the controller at least once a week for visible
damages and defaults on the outside!
•
Detected defaults as well as changes in the operation behavior must be reported
immediately to the person / dept. in charge. Immediate shut-down and securing of
the controller, if required!
Check the electrical equipment of the controller regularly in accordance with the
respective national regulations.