9
E
Fig. 1.2: Display section of the DSP1000P
1
The two
LED
chains display the input signal level in dB, referenced to the internal digital maximum.
+
Please note that the nominal level of the VIRTUALIZER PRO can be selected with the
+4 dBu / -10 dBV switch located on the back panel.
2
The
EFFECT TABLE
gives you an overview of the 32 different effect algorithms.
3
After power-up, the LED display shows the number of the preset last used. This clearly legible, 2½ digit
numeric display has plus/minus indicators to show that parameters are being incremented or decremented
in Edit mode.
Fig. 1.3: Function keys and jog wheel
4
With the
JOG WHEEL
, a continuous rotary control, you can freely edit the selected parameters. Turn
the wheel clockwise to increase the values, or counterclockwise to reduce them.
+
As long as none of the edit functions to the right of the jog wheel have been selected, you can
use the wheel to select a program directly, which is shown by a dot lit up in the display. While
this dot is on, you can select a program though its settings will not take immediate effect.
When the jog wheel has not been touched for at least one second, the LED in the display
disappears and the program will be loaded.
5
Use the
EFFECT
key to directly select one of the 32 basic effect algorithms with the jog wheel.
+
Whenever a new algorithm is selected, all parameters are reset to default values. See table 6.4
in the appendix.
1. INTRODUCTION
Get user manuals:
