background image

14

B-CONTROL 

FADER

  BCF2000-WH

Parameter feedback is enabled in all stand-alone modes. Other

stand-alone modes may cause undesirable MIDI loops. In stand-

alone mode 3, the control data of your B-CONTROL is routed to

the MIDI output B without the merge function.
Your  B-CONTROL  can  also  control  your  computer  via  MIDI

(without a USB connection) as long as your computer features a

MIDI interface. In this case, all stand-alone modes can be used.

To  utilize  parameter  feedback,  you  should  still  use  the  stand-

alone mode 4. Alternatively, you can also use S-3 and connect

the computer via MIDI OUT B so that no MIDI feedback loop is

created.

4.2 “Play” mode menu

The  Play  mode  menu  is  the  highest  menu  level  in  the

B-CONTROL. Use it during normal operation for real-time control

of MIDI data.

Display:

After switching on the unit, the current system software version is

briefly displayed. Value changes are shown when using one of

the control elements, provided that they have been activated.

Control elements:

You can use several keys, encoders and faders simultaneously

and send their MIDI data. The classification of MIDI data types is

explained  in  chapter  4.4.  According  to  its  assigned  MIDI  data

type, each control element shows the current parameter value in

the corresponding LED or LED ring.
The position of the faders changes automatically as soon as you

choose another preset or during incoming parameter messages.

LED display:

The 

encoder

 LED ring displays or the status LEDs of the 

buttons

change  automatically  when  running  controller  recordings  in  a

sequencer, provided, of course, all connections have been made

correctly, the correct operating mode is enabled and the software

sequencer supports sending parameter values.
Button illumination varies according to the controller mode: if a

button

 is in “Toggle on” mode, the button LED illuminates as

soon as the button is pressed. Only when you press the button

once again, the LED goes out. If a button is in “Toggle off” mode,

the corresponding LED will be lit only for the time the button is

pressed.
The  performance  of  the  control  elements,  the  display  and  the

LED displays can be individually set up and is explained in chapter

4.3 “Programming”.

4.2.1 Selecting a preset

s

Select  a  preset  with  the  PRESET  button 

.  The  new

preset number is indicated in the display.

s

Alternatively,  you  may  select  a  preset  by  pressing  and

holding  down  the  preset  button  while  moving  one  of  the

push encoders 

.

s

As soon as you release the PRESET button, the new preset

is active.

4.2.2 Copy/store presets

s

Press the STORE button to save a preset. The button LED

starts to flash.

s

Select a memory number using the PRESET buttons or by

holding down one of the PRESET buttons while moving a

push encoder at the same time. The new preset number

flashes in the display.

s

By pressing STORE again, the STORE LED and the display

stop flashing.

s

If you want to overwrite the current preset, press the STORE

button twice (step 2 can be cancelled).

s

Cancel the store procedure by pressing the EXIT button.

We deliberately did not include an autostore function. That way,

you can assign a new MIDI control to a control element without

changing the current preset. If you want to restore a preset, just

select another preset briefly and again return to editing. Now, the

old data has been restored.

4.2.3 Copying encoder groups

With this function you are able to copy an entire encoder group

within a preset. This saves a lot of programming effort if all encoder

groups within a preset consist of the same basic functions (e.g.

MIDI channel, CC number for turn and push function).

s

Press  the  encoder  group  button  of  the  group  you  want

to copy.

s

Press STORE; the STORE button LED flashes.

s

Now select the destination encoder group. The destination

encoder button LED flashes.

s

Press  STORE  again,  the  STORE  button  LED  is  no

longer lit.

s

Cancel the store procedure at any time by pressing EXIT.

+

To permanently store encoder group settings, carry out

the preset store function as explained in chapter 4.2.2.

+

To copy an encoder group into a 

different

 preset, you

have to copy an entire preset! After that, you can copy

or rearrange the encoder groups in the new preset as

described above.

4.3 Programming

4.3.1 The LEARN function

The  easiest  way  to  assign  MIDI  functions  to  individual  control

elements is to use the LEARN function. Here, the MIDI data is

assigned  remotely.  For  example,  MIDI  data  sent  from  a  MIDI

sequencer to your B-CONTROL is assigned to a control element

selected beforehand.
With LEARN, not only CC, NRPN and note commands can be

received but almost any type of MIDI data, including short SysEx

strings.

s

Press and hold the LEARN button while operating any control

element.  This  can  be  a  fader,  a  PUSH  encoder,  button,

footswitch or sustain pedal. The control element is shown in

the display (e. g. Fd 8).

+

When using push encoders, select an encoder group

beforehand.  In  addition,  you  have  to  differentiate

between turn and push function.

s

Now, release the LEARN button. The B-CONTROL is waiting

to receive MIDI data.

s

Start transmitting MIDI data from your sequencer. As soon

as the data is received by the B-CONTROL, it is shown in

the display.

s

After correct data transmission, the display shows “GOOD”

or “bAd” if wrong, faulty or too extensive data has been sent.

s

To leave or cancel LEARN, press the EXIT button.

4. OPERATION

All manuals and user guides at all-guides.com

Summary of Contents for B-Control Fader BCF2000-WH

























Reviews: