Behncke EWT 60 TD, Installation Instruction

Page: 28 / 108

28
1 Safety
1.1 Risks When Handling Electric Heat Exchanger
The electric heat exchanger has been built on the basis of state-of-the-art techno-
logy and the approved safety-technical guidelines. Nevertheless, risks might occur
during use such as
– violation of operator or
– third parties
– impairments in electric heat exchanger or
– damage to other material values.
All persons, who are engaged in installation, initial operation, operation, mainte-
nance and repair of the electric heat exchanger, have to:
– be suited accordingly, mentally and physically.
– be qualified accordingly.
– strictly observe these installation instructions.
The electric heat exchanger may only be used
– for the intended purpose.
– in a perfect safety-technical state.
In the case of disorders, which might impair safety, a sanitary expert is to be
consulted.
It is your safety!!
1.2 Safety Instructions and Information
The following symbols are used in this safety instruction:
This symbol means warning of dangerous electric high power to the health of
persons.
Non-observance of this information might lead to severe injury.
This symbol means possible danger to the health of persons.
Non-observance of this information might lead to severe injury.
This symbol means
a possible hazard for the health of persons.
Non-observance of this information might lead to injury to persons.
or damage to things.
This symbol gives important information for correct handling of the system.
Non-observance of this information might lead to disorders in the system or the
environment.
Safety