BEHA UNITEST 93560, Instruction Manual

Page: 30 / 40

5. 4 Point Average Measurement
Illuminance is a measurement of the amount of visible light incident upon a pres-
cribed surface area.
• Press the “ I” power key to turn on the meter.
If the unit “ cd“ is displayed on the screen, change to luminous intensity mea-
surement using the “ cd“ key (5). After the change-over, the unit “ Ix“ is dis-
played on the screen.
• Press “ lux/fc” key select the desired lux or fc unit.
• Remove the photo detector cap and face the detector to the light source in a
horizontal position.
• Read the illuminance value from the LCD display.
• Press “ AVG” key to enter to point illuminance value average function, the an-
nunciator “ AVG” is displayed.
The maximum measurement is 99 points,
• Press “ MEM” key each time, stores one measured point value to memory. The
annunciator “ AVG NO.XX” is displayed.
• Press “ READ” key to cycle through perform the point average compute, the
second annunciator “ AVG ” is displayed,
• When pressing the “ READ“ key (9) again, the average value display is swit-
ched off.
• Further measurement values may now be saved in addition to the average
value calculation, as described above.
Even during average value display, it is possible to save further new measu-
rement values. The display indicates the respectively newly calculated ave-
rage value.
10