BEFCO C30-CE5H, Operator'S Manual

Page: 23 / 52

13. If fuel needs to be added, allow engine to cool before filling. Use only approved
funnel and container to handle gasoline. Do not fuel tank indoors. Wipe up spilled
gasoline.
14. After servicing, be sure all tools, parts and service equipment are removed.
15. Never replace hex bolts with less than grade five bolts unless otherwise specified,
i.e. shear bolts
9
.
16. Where replacement parts are necessary for periodic maintenance and servicing,
genuine replacement parts must be used to restore your equipment to original
specifications. The company will not claim responsibility for use of unapproved parts
and/or accessories and other damages as a result of their use.
17. Unauthorized modifications to the machine may impair the function and/or safety of
the machine and reduce its life. If equipment has been altered in any way from
original design, the manufacturer does not accept any liability for injury or warranty.
4.02 - Service
The accompanying illustration shows lubrication points. The chart gives the frequency of
lubrication in hours, based on normal operating conditions. Severe or unusual
conditions may require more frequent lubrication.
Use a good quality SAE multipurpose type grease for all locations shown. Be sure to
clean fittings thoroughly before using grease gun.
Refer to engine manufacturer’s operator’s manual for service requirements on engine.
M
AINTENANCE
23
BEFCO
C
YCLONE
O
PERATOR
’
S
M
ANUAL
9
Refer to Table 1 - Torque Specifications, page 29.
Fig. 13 - Lubrication points.