BEFCO C30-CE5H, Operator'S Manual

Page: 17 / 52

To offset the mower do the following:
1. Loosen the nuts that secure the “U” bolts to the offset bar.
2. Position the mower and the offset bar in the desired position to the left or right of the
tractor.
3. Secure the nuts back on the “U” bolts.
3.08 - Start Up
Before starting to mow, never forget that the operator is responsible for the following:
1. Safe and correct driving of the towing vehicle and mower.
2. To learn precise safe operating procedures for both the towing vehicle and the
mower.
3. To ensure all maintenance and lubrication has been performed on the mower.
4. To have read and understood all safety aspects for the mower and the engine in the
respective operator’s manuals.
5. To have read and understood all safety decals on the mower.
6. Checking the condition of the blades. Worn or damaged blades should be changed
before starting
5
.
7. Checking to ensure that the cutting edge is the leading edge of the blade
6
.
8. Checking that there is no wire, weed, grass or other material wrapped around
blades.
9. Checking the towing vehicle tires for the proper pressure in accordance with the
tractor operator’s manual.
10. Making sure the proper attire is worn. Avoiding loose fitting clothing which can
become entangled. Wearing sturdy, tough-soled work shoes and protective
equipment for eyes, hands, ears and head. Never operate mower in bare feet,
sandals or sneakers.
O
PERATION
17
BEFCO
C
YCLONE
O
PERATOR
’
S
M
ANUAL
6
See Section 4.03 - Blade Maintenance.
5
See Section 4.03 - Blade Maintenance.
Fig. 10 - Offsetting the mower.
up to 75" up to 75"