WARNING: Ensure pivot bolt that attaches the moldboard to the pivot box is
properly tightened to the welded nut. Blade can fall causing serious injury if pivot
bolt is not securely installed.
Tilt adjustment (see fig. 7):
On the heavy duty series (BRB-284 and BRB-296) the tilt of the blade can be adjusted
by using one of the five tilt positions available on the blade swivel (2 on the right, 2 on
the left and one center position). The blade can be tilted 15 or 30 degrees right or left by
pulling out the tilt pin
(see #11, fig. 3)
on the swivel box
(see #1, fig. 3)
and replacing it
at the desired tilt angle.
O
PERATION
17
BEFCO
R
EAR
B
LADES
O
PERATOR
’
S
M
ANUAL
Fig. 7 - Blade tilt adjustment.
15°
0°
15°
0°
30°
30°
