5 - REPAIR PROCEDURES
CAUTION: All repair procedures must be done by authorized dealerships. It is not
recommended that untrained individuals perform any repair work.
The following
operations are detailed for qualified personnel only. Never work under the
implement without properly blocking the unit.
5.01 - Cutting Blade Reversal or Replacement
CAUTION: Always keep feet away from the blade. It is possible that it could slip
and fall causing injury.
Our scraper blades are reversible. They may be rotated to give a fresh cutting edge.
To remove the blades proceed as follows
(see fig. 10)
:
1. Properly support the implement using blocks to support the side plates.
2. Remove the nuts from the plow bolts and turn the blade over.
3. Inspect nuts and bolts and replace them with 5/8”-11x1.75” grade 5 plow bolts if
necessary.
R
EPAIR
P
ROCEDURES
25
BEFCO
R
EAR
B
LADES
O
PERATOR
’
S
M
ANUAL
Fig. 10 - Cutting blade replacement.
1. nut and lock washer 5/8"
2. plow bolt 5/8"x1.75"
3. reversible cutting blade
2
3
1
4. moldboard
4
