Judgment of the siren
When the siren sounded after the system has detected an attempted break-in, press one of three buttons: or or once (short press <1 sec.), the siren stops and
system returns to the active mode after 3 seconds.
Desactivation (3)
When the system is activated, press the once (short press <1 sec.), turn signals will flash 2 times. The remote will beep
2 times, the LCD screen on the remote turns red. The system will be deactivated immediately.
If the siren sounds, pressing the button to stop the siren and disarm the system simultaneously.
The remote screen will display the icons as shown against (3)
Anti hi-jacking = anti-steering
This function is used to alert and block the two wheels when turning when you are close to the two wheels.
If the owner of two wheels is pointing while driving, press the for 3 seconds while the remote is in range with the two wheels (max. = 50 m. in open field), turn signals
will flash 3 times and the remote beeps three times.
PHASE I -> 10 seconds (the two left wheels), the siren starts to beep sound quickly. During this phase I, it is possible to stop the anti hi-jacking by pressing
PHASE II -> 30 seconds later, the siren starts to ring non-stop and the engine is turned off. Be confirmed in legislation
in your country. To exit the mode while anti hi-jacking, you must press the button 5 times of emergency concealed
(ask your installer to the location)
Adjusting the sensitivity of the detector SHOCKLIFT ™ (4)
The integrated sensor SHOCKLIFT ™ adjusts to 4 levels. Press the button for 3 seconds to select the sensitivity level.
The factory is on level 3.
Level 1 = off sensor
Level 2 = Low Sensitivity
The screen appears as shown against (4)
Level 3 = average sensitivity
Level 4 = high sensitivity
9
(3)
(4)
