4
INSTALLATION MANUAL
Precautions
Thank you observe the following before installing the system:
• This system is designed to be installed on a 2-wheel (motorcycle, scooter, quad, ...) with a 12 volt battery and an electric starter.
• The system runs on 12V DC (12V DC). Be sure the polarity of each wire.
• Check before installation if all elements of the car are working properly such as contact & motor starting, lighting codes, lights and headlights, turn signals, ... Check after
installing all these elements work.
• Do not connect the son by splice / solder without using lugs. The connections may create serious problems with the system and the vehicle also.
• When you connect the system's overall WEIGHT, it is very important that this mass is completely open and stable (no leaks).
• Ensure that every son passing in tight spaces are protected by adhesive tape to avoid excessive twisting and degradation of the plastic wire with risk of bad contacts.
• Ensure that the son of the system and all safety devices are best hidden in the vehicle as possible, never forget that you install a security system.
• Use a digital multimeter to identify each of the polarities of the son, using a test light to locate the wire Tachometer (if necessary).
