Beem i-Joy Cafe, User Manual

Page: 32 / 104

28 EN BEEM - Elements of Lifestyle
2. Empty the strainer insert (10 or 11) as de-
scribed in the section Emptying the strainer
insert (page 23) .
3. Rinse the strainer insert (15) and holder
(10 or 11) under running water.
HINWEIS
► The strainer holder is NOT suitable for
the dishwasher.
► The strainer inserts can be cleaned in
the dishwasher.
Emptying/cleaning the drip trays
1. Take the drip trays (16, 17) out of the ap-
pliance.
2. Empty the drip trays (16, 17) and clean
them with warm water.
3. After drying, install the drip trays and rest-
ing grates (16, 17) into the appliance.
HINWEIS
► The drip tray and the resting grate can
also be cleaned in the dishwasher.
Cleaning the steam nozzle
(images G1, G2)
To prevent clogging, clean the steam nozzle
(6) after each use. To do this, proceed as
follows:
DANGER
► Danger of scalding! The steam nozzle
(6) becomes hot during operation, allow
the steam nozzle (6) to cool down before
removing the attachment.
1. Pour water into to the water tank (3) and
the milk container (5).
2. Set the steam regulator (7) to (image
G1).
3. Put a suitable receptacle onto the small
drip tray (17).
4 . Only use the operating lever (8) to posi-
tion the steam nozzle (6) so that it protrudes
into the receptacle.
5. Press the selector button (14) for at
least 3 seconds until indicator lamps 12 and
13 extinguish, cleaning then begins.
6. Milk and other residue is rinsed out of the
metal pipe. The process stops automatically.
7. Allow the coffee machine to cool down
and remove the milk container and lid out of
the coffee machine.
Clean the milk container and its lid
1. Remove the lid from the milk container.
2. A silicon cover is on the top of the lid
(image A). Open the cover and turn it to the
side. The silicon cover cannot be removed.
3. Turn the lid over (image B). Pull the sili-
con tube off.
4. Remove the steam nozzle: turn it antic-
lockwise until the groove and latch are above
each other, remove the steam nozzle attach-
ment (image G2).
5. Press the side of the lid to “Push“
(image C). Pull the two lid pieces apart.
A
C
B