Beem DYNAMIC i-POWER, User Manual

Page: 32 / 80

28
DYNAMIC i-POWER EN
BEEM - Elements of Lifestyle
Fault Possible cause Remedy
Steam diminishes or
no steam
Reduce temperature Wait for a few seconds
Water tank empty Fill with water
Iron is calcified Perform self-cleaning
Steam ironing not set
Set the desired steam flow with
the steam flow regulator
Stains in ironed
washing
Water in tank is discol-
oured
Always empty the water tank
after use
Calcium particles
leak out of the steam
nozzles
Iron is calcified Perform self-cleaning
Washing remains
creased
Temperature too low
Set temperature as high as pos-
sible. Pay attention to the label in
the garment!
Singed areas on the
ironed washing
Temperature too high
Set temperature lower and allow
iron to cool down Pay attention
to the label in the garment!
House safety fuse is
triggered
Appliance defective Contact customer service.
Too many appliances con-
nected.
Reduce the number of appli-
ances on the power circuit.
NOTE
If you cannot resolve the problem with the steps described above, please contact ►
customer service.