EN
22
“Aroma” Function
The brewing time can be extended with the “Aroma” function. The extended brewing time will
give your coffee a more intense
fl
avour.
Touch the
AROMA
fi
eld (
15
), the
fi
eld
fl
ashes. If the brewing process is then started, the
fi
eld
continues
fl
ashing and the “Added Flavour” function is switched on.
Please Note!
The “Added Flavour” function switches off automatically after each brewing process.
Keep-Warm Function
The device has an automatic keep-warm function. The hotplate remains switched on for approx.
40 minutes after each brewing process.
If the keep-warm function is to be ended before this, touch the
fi
eld
(
17
).
Preparation
PLEASE NOTE!
•
The device should only be used if it has been correctly assembled! Before each use, check
whether the
fi
lter insert and the permanent
fi
lter are inserted correctly and whether the
water tank is
fi
lled correctly!
•
Do not operate the device without water. If this does happen, the device switches off
automatically. In this case, allow the device to cool down before water is poured in and the
device is used again.
•
Never use the device without a suitable jug below the coffee outlet.
1. Prepare the coffee machine (see the “Handling and Operation” chapter).
2. Touch
the
fi
eld
(
17
) to start the brewing process. The operating
fi
elds go out, apart from
the
fi
eld
(and the
fi
eld
AROMA
(
15
), if activated). Hot water is poured over the coffee
powder to brew it.
After the end of the brewing process you will hear three beeps and all operating
fi
elds are
displayed again. The glass jug can then be removed.
To end the brewing process prematurely, touch the
fi
eld
again.
The brewing process is aborted.
Making Coffee with a Preset Time
To make coffee with a preset time, the clock needs to be set (see the “Handling and Opera-
tion” chapter – “Time”).
1. Prepare the coffee machine (see the previous chapter).
2. Touch
the
fi
eld
AUTO
(
16
) for approx. 5 seconds, the time indicator
(
13
) and the
indica-
tor (
12
) on the display
fl
ash.
