Leak test:
You must carry out a leak test for all gas-bearing components after connecting the gas cylinder for the first time,
every time after changing the cylinder or a prolonged gap. For this purpose, you can use a commercially available
leak detection spray.
Turn on the gas supply and use the spray according to the manufacturer’s instructions.
Do not use a naked flame to detect leaks under any circumstances.
If you detect a leaky connection, turn off the gas supply immediately and retighten the corresponding connection.
Run the leak test all over again.
If you are about how to connect the gas cylinder and the tube, or you are doubtful about the leak test, please get
a qualified technician to do the job of connecting the gas-bearing components.
5
Summary of Contents for Beefer 1
Page 1: ...D english Englisch ingl s...