Beechcraft C-12C, Operator And Technical Reference Manual

Page: 181 / 949

TM 1-1510-218-10
3-27
5. Turn the right outer knob one step
clockwise to move the flashing portion
of the cursor to the second cursor
position, then use the right inner knob
to select the second character.
the sectorization is to show the frequency first,
followed by the identifier of the associated reference
point, followed next by the applicable radials, and,
finally, the associated altitude restrictions.
NOTE
6. Use the right outer and inner knobs to
select the rest of the first line of the
remark.
When an altitude restriction is shown on
the APT 4 page, the abbreviation BEL
means at and below the specified altitude.
The abbreviation ABV means at and above
the specified altitude.
7. Press the ENT button to approve the
first line. The cursor will move to the
second line.
KORL
APR 121.10
REF: KMCO
311
o
- 60
o
BEL 5500FT
APT+4
8. Use the above procedure to select the
characters of the second and third
lines of
the remark. Press the ENT
button to individually approve each
line of the remark.
9. Press the right CRSR button to turn
the right cursor function off.
(6) Airport 6 Page . The APT 6 page shows
aeronautical services available for the selected airport.
These services include customs, fuel, and oxygen
availability as well as an indicator of a landing fee.
Figure 3-24. APT 4 Page (BEL)
(a) Customs Information. Refer to Table
3-9 for customs displays and their explanations.
In a few cases, APR, DEP, CL B, CL C, TRSA,
CTA, and TMA frequencies are sectorized such that
the restriction cannot be displayed on a single page.
When this occurs, TEXT OF FREQUENCY USAGE
NOT DISPLAYED is displayed on the APT 4 page.
There are some airports in the database for which no
communications information is available. In this case,
COMM FREQ DATA NOT AVAIL is displayed.
Table 3-9. Customs Information
(Continued)
DISPLAY EXPLANATION
Blank Blank line indicates that
customs information is not
available in the database.
CUSTMS–
ADCS Customs are available for
private aircraft arriving to the
U.S. from Canada or Mexico.
Advance notice of arrival to
customs officers is to be
included in the flight plan
transmitted to a FAA facility.
This code is used when this is
the only type customs facility
available.
CUSTMS–
PR Customs facilities are available,
but require prior request or
permission for use.
CUSTMS–
REST Customs facilities are available
on a restricted basis. Check
with airport before planning to
use.
(5) Airport 5 Page . The APT 5 page is used
to store and display user-entered remarks. These
remarks might include information on lodging, dining,
airport services, etc. Up to 100 airports may contain
these remarks. A remark may contain up to 3 lines of
11 characters each. Letters, numbers, hyphens, and
spaces may be used in the remark.
1. Select the APT 5 page for the desired
airport.
2. Press the right CRSR button.
3. Rotate the right outer knob until the
cursor fills the entire third line of the
screen.
4. Use the right inner knob to select the
first character of the remark.