13
Conducting multi-patient breath tests
WARNING: Ensure batteries are full or device is connected to computer USB port (it will be powered by the
USB). If the device loses power during the automatic testing mode only saved results will remain on the
device and the protocol timings will be lost.
The Gastro
+
™ Gastrolyzer® allows automatic testing for up to 10 patients in one session to be set up, which
can be very time-saving in a busy clinic. This can be done by following these steps:
Press the multi-patient icon on the main
screen; this will go to the patient database
screen, where patients can be selected that
have been previously added. To add
patients follows instructions in ‘adding a
patient profile’ section of this manual.
Up to 10 patients can be selected for testing
simply by pressing their name slot. Selected
patients will change from pink to green
when selected, to deselect them press the
name slot again and it will return to pink.
Once the desired patients have been
selected, press the right arrow at the
bottom of the screen to progress to the
protocol screen.
Summary of Contents for Gastro+ Gastrolyzer
Page 47: ......
