Weedbrush-Edgecutter
Type: BECX OBKS90-45
Version: 2
November 2019
Page 11 of 27
3.1
Mechanical components tool carrier attachments
Figure 2: General overview of the mechanical components
Figure 2
Part
Explanation
1 t/m 5
Tool carrier
attachment
•
The unit is attached by an adapter (figure 2:2) attached to the
tool-attachment-point (figure 2:1) of the tool carrier.
•
The attachment off the weed brush to the adapter consists of
2 mounting-pins (figure 2:5) and 2 locking pins (figure 2:3)
•
When the unit is in the right position it can be locked with the
lever (figure 2:4).
•
The implementation of the adapter and its attachment to the
tool carrier is dependent on the type of tool carrier.
•
The up and down movement is realized by the fixture to be
tool carrier. This is not part of the weed
brush, it’s controlled
by the tool carrier.
6
Support legs
•
Two support legs are attached to the weed brush (figure 2.6)
•
The support legs have to be completely raised or removed.
•
If the unit is dismounted from the tool the support legs can be
installed to put the unit down and stable on the ground.
6
1
3
4
5
2
