Weedbrush-Edgecutter
Type: BECX OBKS90-45
Version: 2
November 2019
Page 16 of 27
4
Operations
4.1
Assembly and adjustment of the weed brush
Nr.
What to do
Action
Result
1
Select the correct tool
carrier and lifting arm
•
make sure that the tool carrier and lifting
arm are sufficiently strong and stable for
the weed brush (see chapter 1 for the load
when lifting and the exerted moment of
the lifting).
•
Make sure that the maximum pressure and
number of revolutions (oil flow) are not
exceeded.
•
Make sure that the correct rapid
attachment connections are installed for
the feed line, return line and drain line.
•
Make sure that the correct clasp is used.
Ignoring the stated
values can result in
damage to
equipment and
injury to persons.
2
Connect the hoses
•
Connect the rapid attachment connections
for the feed line, return line and drain line .
3
Adjust the hydraulic
system
•
Adjust the setting of the hydraulic
aggregate so that the maximum pressure
and number of revolutions cannot be
exceeded.
•
This will depend on the type of tool carrier
that is used. Please refer to the manual of
the tool carrier.
4
Adjust the positions
for the blade and
brush
•
With help of the different hydraulic
functions the blade and brush can be
adjusted to achieve the correct result with
the weed brush.
