Becx Machines HS75HR, User Manual, Page: 12 / 35

Hedge trimmer
Type: HS75HR
Version: 01
July 2019
Page 12 of 35
3.1 Mechanical components
Figure 3: Overview of mechanical components
Figure element explanation
1 Fixing sleeve

The hedge trimmer is attached to the arm of the tool holder
using the fixing sleeve.
2 Angle inclination

Once the hedge trimmer is fastened to the arm, the correct
angle can be set. (see paragraph 4.1)
3 Hydraulic motor
(3*)

Each blade head is driven by its own hydraulic motor.
4 Inlet side

During trimming, the twigs to be cut enter the inlet side
through the protective flaps of the PUR SH 90 A near the
blade heads.
5 Blade head (3*)

Each blade head has four blades. The two blades on the
lower layer cut the hedge twigs. The two blades on the upper
layer shred the sprigs into small pieces.
6 Protective cover

The protective cover is made of high-quality steel and
prevents cut material from flying away.
4 3 1 2
6
5