Configuration
CX9020
36
Version: 2.0
7.2
Beckhoff Device Manager
7.2.1
Starting the Beckhoff Device Manager
With the Beckhoff Device Manager an Embedded PC can be configured by remote access with the help of a
web browser. Depending on the image version, access takes place via different protocols and requires
different open ports. For older image versions access takes place via the HTTP protocol and Port 80 (TCP).
More up-to-date image versions use HTTPS and Port 433 (TCP).
Requirements:
• Host PC and Embedded PC must be located in the same network. Depending on the version of the
operating system, the network firewall must allow access via port 80 (HTTP) or port 433 (HTTPS).
• IP address or host name of the Embedded PC.
Table 21: Access data for the Beckhoff Device Manager on delivery.
Operating system
Access data
Windows Embedded Compact 7
User name: Webguest
Password: 1
Start the Beckhoff Device Manager as follows:
1. On the host PC enter the IP address or the host name of the Embedded PC in the web browser, in order
to start the Beckhoff Device Manager.
Example with IP address:
https://169.254.136.237/config
Example with host name:
https://CX-16C2B8/config
2. Enter the user name and password. The start page appears:
ð
Continue to navigate in the menu and to configure the Embedded PC. Note that modifications only
become active once they have been confirmed.
Summary of Contents for CX9020
Page 1: ...Manual CX9020 Embedded PC 2 0 2019 04 09 Version Date ...
Page 2: ......