User’s Guide
Chapter 3
Document 609909-AA
3-8
Biomek 2000
To save this configuration as the Default Configuration, go to the
Method
menu and
choose
Save As
. Verify that the method name is specified as
Default Config
. The
name must be typed exactly as shown for BioWorks to recognize this as a default
configuration.
Click OK to save the configuration.
When you open a new method, you will be given the option of using Default
Configuration as the starting point for the Initial Configuration.
Placing Labware on the Worksurface
You place labware on the worksurface for use by a method as follows:
Select the piece of labware (plate, tube rack, device, etc.) from the Labware bar. Use
the buttons at the far right to select a labware category, and use the scroll box to select
a specific labware type within that category.
Specifying a Method Step (Action)
First, click the desired function icon on the Function palette. In this example, the Mix
at Location icon is selected.
Mix at
Location
Icon
Summary of Contents for Biomek 2000
