Beckman Instruments Biomek 2000, User Manual

Page: 37 / 80

Chapter 3 User’s Guide
Document 609909-AA
Biomek 2000 3-7
The workstation setup can only be changed when you are in the Initial Configuration
of the method (that is, you have highlighted the Initial Configuration line). If you
change the workstation setup at any other time, the system will assume that it is a
manual or automatic move and add the step to the method.
Default Configuration
If you are using the same initial layout for multiple methods, you can edit the Default
Configuration to reflect the common items. This way, when you create a new method,
much of the initial configuration layout will already be done for you.
To edit the Default Configuration, select Options/Default Configuration from the
Edit module:
The worksurface is then displayed. Place the items that you want to appear in the
Default Configuration on the worksurface just as you would for a method.
Default
Configuratiom
Worksurface