Beckhoff KL31 2 Series, Documentation

Page: 49 / 56

Access from the user program
KL31x2 49 Version: 2.4.0
Key
Bit Name Description default
R32.15* CallibrationDisplay 0
bin
During the calibration, the terminal sets the overload bit SB1.1
[ } 42] and the underload bit SB1.0 [ } 42] .
0
bin
1
bin
Compatibility mode: During calibration, the terminal sets the
error bit
SB1.6 [
}
42] .
R32.14* Display StabilityError 0
bin
Stability error is not displayed. 0
bin
1
bin
If no stabilization [ } 15] of the calibration values is achieved,
the terminal indicates this by setting the error bit SB1.6 [ } 42] .
(see note below)
Fluctuating measuring signals
Strongly fluctuating measuring signals can make stabilization of the calibration values impossible. In
this case, skip the stabilization and disable it with bit
R32.7 [ } 48] .
Bit Name Description default
R32.13 - reserved 0
bin
R32.12 - reserved 0
bin
R32.11 disChannel 0
bin
Channel switched on 0
bin
1
bin
Channel switched off
R32.10 enTh2 0
bin
Limit value 2 is not active 0
bin
1
bin
Limit value 2 is active
R32.9 enTh1 0
bin
Limit value 1 is not active 0
bin
1
bin
Limit value 1 is active
R32.8 enOverProt 0
bin
Measuring range limitation not active 1
bin
1
bin
Measuring range limitation active
R32.7 enStable 0
bin
Stabilization [
}
15] of the calibration value not active
1
bin
1
bin
Stabilization [
}
15] of the calibration value active
R32.6 disDiffMeasure 0
bin
Differential measurement active 0
bin
1
bin
Differential measurement not active (only KL3132, KL3162,
KL3172, KL3182)
R32.5 disCali 0
bin
Cyclic calibration of the A/D converter active 0
bin
1
bin
Cyclic calibration of the A/D converter not active
R32.4 enSiemensFormat 0
bin
Siemens output format not active 0
bin
1
bin
Siemens output format active
R32.3 enAverageFormat 0
bin
Signed amount representation not active 0
bin
1
bin
Signed amount representation active
R32.2 disWdTimer 0
bin
Watchdog timer is active (the watchdog is triggered if no
process data are received for 100 ms) 0
bin
1
bin
Watchdog timer is not active
R32.1 enManScal 0
bin
Manufacturer scaling is not active KL3162, KL3172,
KL3142, KL3152: 0
bin
1
bin
Manufacturer scaling is active KL3132, KL3182: 1
bin
R32.0 enUsrScal 0
bin
User scaling is not active 0
bin
1
bin
User scaling is active
*) Bit R32.14 and bit R32.15 are only available with the following firmware versions:
• KL3132, KL3152, KL3162, KL3172, KL3182: Firmware version 2B or higher
• KL3142: Firmware version 2C or higher