Beckhoff EPP3752-0000, Documentation

Page: 10 / 56

Product overview
EPP3752-0000 10 Version: 1.2
3.2 Technical data
All values are typical values over the entire temperature range, unless stated otherwise.
EtherCAT P
Connection 2 x M8 socket, 4-pin, P-coded, red
Minimum cycle time 200 µs
Supply voltages
Connection See EtherCAT P connection
U
S
nominal voltage 24 V
DC
(-15 % / +20 %)
U
S
sum current: I
S,sum
max. 3 A
Current consumption from U
S
100 mA
Rated voltage U
P
24 V
DC
(-15 % / +20 %)
U
P
sum current: I
P,sum
max. 3 A
Current consumption from U
P
None. U
P
is only forwarded.
Accelerometers
Sensor type Two 3-axis sensors / offset by 90°
Resolution
1) 2)
Measured values: 4 mg (default)
Raw values: 10-bit (default)
Representation
1)
Measured values: 1 mg / LSB
Raw values: 10-bit in 16-bit (left aligned)
Measuring range
1)
±2 g / ±4 g / ±8 g / ±16 g selectively
Sampling rate 200 Hz to 5 kHz
1)
Unit of measurement: 1 g = 9.81 m/s
2
(acceleration of gravity). 1 mg = 1/1000 g.
2)
The resolution depends on the parameterization of the box. See section Resolution [
}
11] .
Housing data
Dimensions W x H x D 30 mm x 126 mm x 26.5 mm (without connectors)
Weight approx. 165 g
Installation position variable
Material PA6 (polyamide)
Environmental conditions
Ambient temperature during operation -25 … +60 °C
-25 … +55 °C according to cULus
Ambient temperature during storage -40 … +85 °C
Vibration resistance, shock resistance conforms to EN 60068-2-6 / EN 60068-2-27
Additional checks [
}
11]
EMC immunity / emission conforms to EN 61000-6-2 / EN 61000-6-4
Protection class IP65, IP66, IP67 (conforms to EN 60529)
Approvals / markings
Approvals / markings
*)
CE, cULus [
}
19]
*) Real applicable approvals/markings see type plate on the side (product marking).