Beckhoff EP9214-0023, Documentation, Page: 51 / 113

Comissioning and Configuration
EP9214-0023 and EP9224-0023 51 Version: 2.3.1
4.5.1.1.3 Index 8010 DPO Settings Ch.2
Index Name Meaning Data type Flags Default
8010:0 DPO Settings
Ch.2 UINT8 RO 0x13 (19
dec
)
8010:02 Default State Us The output adopts this value if F707:01 is not set boolean RW 0x01 (1
dec
)
8010:03 Default State Up The output adopts this value if F707:01 is not set boolean RW 0x01 (1
dec
)
8010:11 Characteristic Specifies the characteristic with which the current monitor-
ing reacts:
0
dec
: very fast acting
1
dec
: fast acting
2
dec
: slow acting
3
dec
: time delay
UINT16 RW 0x0001 (1
dec
)
8010:12 Nominal Current
Us Nominal maximum current at the output UINT16 RW 0x0FA0 (4000
dec
)
8010:13 Nominal Current
Up Nominal maximum current at the output UINT16 RW 0x0FA0 (4000
dec
)
4.5.1.1.4 Index 8020 DPO Settings Ch.3
Index Name Meaning Data type Flags Default
8020:0 DPO Settings
Ch.3 UINT8 RO 0x13 (19
dec
)
8020:02 Default State Us The output adopts this value if F707:01 is not set boolean RW 0x01 (1
dec
)
8020:03 Default State Up The output adopts this value if F707:01 is not set boolean RW 0x01 (1
dec
)
8020:11 Characteristic Specifies the characteristic with which the current monitor-
ing reacts:
0
dec
: very fast acting
1
dec
: fast acting
2
dec
: slow acting
3
dec
: time delay
UINT16 RW 0x0001 (1
dec
)
8020:12 Nominal Current
Us Nominal maximum current at the output UINT16 RW 0x0FA0 (4000
dec
)
8020:13 Nominal Current
Up Nominal maximum current at the output UINT16 RW 0x0FA0 (4000
dec
)
4.5.1.1.5 Index 8030 DPO Settings Ch.4
Index Name Meaning Data type Flags Default
8030:0 DPO Settings
Ch.4 UINT8 RO 0x13 (19
dec
)
8030:02 Default State Us The output adopts this value if F707:01 is not set boolean RW 0x01 (1
dec
)
8030:03 Default State Up The output adopts this value if F707:01 is not set boolean RW 0x01 (1
dec
)
8030:11 Characteristic Specifies the characteristic with which the current monitor-
ing reacts:
0
dec
: very fast acting
1
dec
: fast acting
2
dec
: slow acting
3
dec
: time delay
UINT16 RW 0x0001 (1
dec
)
8030:12 Nominal Current
Us Nominal maximum current at the output UINT16 RW 0x0FA0 (4000
dec
)
8030:13 Nominal Current
Up Nominal maximum current at the output UINT16 RW 0x0FA0 (4000
dec
)
4.5.1.1.6 Index F707 DPO Outputs Device
Index Name Meaning Data type Flags Default
F707:0 DPO Outputs
Device UINT8 RO 0x04 (4
dec
)
F707:01 Enable Control
Via Fieldbus 0
bin
: All outputs are set to their default values (80X0:02,
80X0:03)
1
bin
: All outputs are set according to their PDOs (70X0:01,
70X0:02)
boolean RO 0x00 (0
dec
)
F707:04 Global Reset All error bits are reset boolean RO 0x00 (0
dec
)