Beckhoff EL3632, Documentation

Page: 153 / 214

Commissioning
EL3632 153 Version: 2.8
5.6.1.2 Configuration data
Index 80n0 AI settings (for n = 0: channel 1; n = 1: channel 2)
Index (hex) Name Meaning Data type Flags Default
80n0:0 AI Settings Maximum subindex UINT8 RO 0x20 (32
dec
)
80n0:07 Enable limit Activate limit evaluation (deviates from other EL termi-
nals!) BOOLEAN RW 0x0 (FALSE)
80n0:0A Enable user calibra-
tion Enabling of the user calibration BOOLEAN RW 0x0 (FALSE
80n0:0B Enable vendor cali-
bration Enabling of the vendor calibration BOOLEAN RW 0x1 (TRUE)
80n0:13 Limit 1 Upper limit value INT16 RW 0x0000 (0
dec
)
80n0:14 Limit 2 Lower limit value INT16 RW 0x0000 (0
dec
)
80n0:15 Filter settings
Filter [
}
129] settings
0: 10 Hz, Gain 20
1: 100 Hz
2: 500 Hz
3: 1000 Hz
4: 5000 Hz
5: 10000 Hz
6: 25000 Hz
7: 2000 Hz (from
firmware [
}
196] 11)
ENUM RW 10000 Hz (5)
80n0:17 User calibration offset User calibration offset INT16 RW 0
80n0:18 User calibration gain User calibration gain factor INT16 RW 16384
80n0:20 Supply current Sensor current setting
0: 2 mA
1: 4 mA
2: 8 mA ENUM RW 2 mA (0)
80n0:21 Active offset adjust-
ment
Automatic offset calculation [
}
129]
0: Disabled
1: Level 1
2: Level 2
3: Level 3
4: Level 4
5: Level 5
6: Level 6
7: Level 7
8: Level 8
ENUM RW Disabled (0)
Index 80n8 AI advanced settings (for n = 0: channel 1; n = 1: channel 2)
Index (hex) Name Meaning Data type Flags Default
80n8:0 AI Advanced Settings Maximum subindex UINT8 RO 0x06 (6
dec
)
80n8:06 Input Amplifier permitted values: BIT2 RW 0x00 (0
dec
)
0: Preset (setting via object 0x80n0:15 [
}
153] )
1: ON (switch-on of the analog amplifier x20 irrespective
of filter settings; gain factor of 20 is not changeable)
2: OFF (switch-off of the analog amplifier irrespective of
the filter settings)
Index 80nF AI Vendor data (for n = 0: channel 1; n = 1: channel 2)
Index (hex) Name Meaning Data type Flags Default
80nF:0 AI vendor data Maximum subindex UINT8 RO 0x04 (4
dec
)
80nF:01 Calibration offset
(gain 1) Offset (vendor calibration), gain 1 INT16 RW 0x0000 (0
dec
)
80nF:02 Calibration gain (gain
1) Gain (vendor calibration), gain 1 INT16 RW 0x0000 (0
dec
)
80nF:03 Calibration offset
(gain 20) Offset (vendor calibration), gain 20 INT16 RW 0x0000 (0
dec
)
80nF:04 Calibration gain (gain
20) Gain (vendor calibration), gain 20 INT16 RW 0x0000 (0
dec
)