manualshive.com logo in svg

Beckhoff EL1052, Documentation

Share
Download
Beckhoff EL1052 Documentation Download Page 34

Mounting and wiring

EL1052, EL1054

34

Version: 1.1

For devices with Ethernet connectors

Not for connection to telecommunication circuits.

Basic principles

Two UL certificates are met in the Beckhoff EtherCAT product range, depending upon the components:

1. UL certification according to UL508. Devices with this kind of certification are marked by this sign:

2. UL certification according to UL508 with limited power consumption. The current consumed by the de-

vice is limited to a max. possible current consumption of 4 A. Devices with this kind of certification are
marked by this sign:

Almost all current EtherCAT products (as at 2010/05) are UL certified without restrictions.

Application

If terminals certified 

with restrictions

 are used, then the current consumption at 24 V

DC

 must be limited

accordingly by means of supply

• from an isolated source protected by a fuse of max. 4 A (according to UL248) or

• from a voltage supply complying with 

NEC class 2

.

A voltage source complying with 

NEC class 2

 may not be connected in series or parallel with another

NEC class 2

compliant voltage supply!

These requirements apply to the supply of all EtherCAT bus couplers, power adaptor terminals, Bus
Terminals and their power contacts.

Summary of Contents for EL1052


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands