manualshive.com logo in svg

Beckhoff EL1052, Documentation

Share
Download
Beckhoff EL1052 Documentation Download Page 33

Mounting and wiring

EL1052, EL1054

33

Version: 1.1

4.5

Positioning of passive Terminals

Hint for positioning of passive terminals in the bus terminal block

EtherCAT Terminals (ELxxxx / ESxxxx), which do not take an active part in data transfer within the
bus terminal block are so called passive terminals. The passive terminals have no current consump-
tion out of the E-Bus. 
To ensure an optimal data transfer, you must not directly string together more than 2 passive termi-
nals!

Examples for positioning of passive terminals (highlighted)

Fig. 25: Correct positioning

Fig. 26: Incorrect positioning

4.6

UL notice

Application

Beckhoff EtherCAT modules are intended for use with Beckhoff’s UL Listed EtherCAT Sys-
tem only.

Examination

For cULus examination, the Beckhoff I/O System has only been investigated for risk of fire
and electrical shock (in accordance with UL508 and CSA C22.2 No. 142).

Summary of Contents for EL1052


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands