Parameterization and commissioning
4.3
Configuration
4.3.1
CX80xx - Operating system
The CX80xx comes with a Microsoft CE operating system, version 6.0. This operating system is adapted and
optimized for the CX80xx. Not all CE6.0 components are available.
Safety
From image version 3.54b security was tightened. This applies to CERHOST and TELNET. Both services
are now switched off in delivery state. To reactivate these services, you need a Micro SD card reader.
CERHOST
CERHOST is deactivated by current images on first start-up via the registry file
CeRemoteDisplay_Disable.reg
, which is located in the folder
RegFiles
.
To reactivate CERHOST, delete the file
CeRemoteDisplay_Disable.reg
from the folder
RegFiles
and also the
folder
Documents and Settings
.
Then reinsert the Micro SD card in the CX and reboot. The CX creates a new
Document and Settings
directory and then reboots automatically.
The CX is then accessible again via CERHOST.
TELNET
TELNET is deactivated by current images on first start-up via the registry file
Telnet_Disable.reg
, which is
located in the folder
RegFiles
.
To reactivate TELNET, delete the file
Telnet_Disable.reg
from the folder
RegFiles
and also the folder
Documents and Settings
.
Then reinsert the Micro SD card in the CX and reboot. The CX creates a new
Document and Settings
directory and then reboots automatically.
The CX is then accessible again via TELNET.
IMAGE
If you do not know what image is loaded on the CX80xx, you can determine it quite easily.
• Via the web diagnostics page of the CX. Here you can find the build number under the
TwinCAT
device.
Opening the web diagnostics page:
- IP address</config
or
- CX name/config
Example:
-
172.16.17.201/config
or
- CX-01551E/config
• Via a Micro SD card reader.
The Micro SD card contains a file with the name of the image.
Example CX8000_CE600_LF_v354b_TC211R3_B2248.
TC211R3_2248 indicates the TwinCAT build; in the example the build is 2248.
CX8080
23
Version: 1.0.0
