Beckhoff AX2500 Series, Assembly, Installation, Setup

Page: 32 / 81

3.4.5
Connection techniques
3.4.5.1
Shield connection on the front panel
32 AX2500 Installation Manual
Installation
02/06
Beckhoff
The pre-assembled cables for
AX2500 are provided with an over-
all metal ferrule at the amplifier end
that is electrically
connected to the shielding.
Thread a cable tie through each slot
in the shielding strip (front panel) of
the servo amplifier.
Tighten up the cable ties so that the
shielding ferrule and the sheathing
of the cable is pressed down tightly
against the shielding strip.
AX2500
AX2500