Becker P5-B01, Assembly And Operating Instructions Manual

Page: 9 / 20

Then mount the wall bracket and idler. Ensure that the barrel is aligned at right angles to the wall and that sufficient axial play is al-
lowed for the mounted system.
Attention
When using anti-lifting devices, closed brackets must be fitted. The tubular drive presses the closed curtain
down to make it difficult for people to reach under it or raise it. Only use curtains made of sufficiently strong
material, such as aluminium, steel or wood. To prevent damage to the curtain it must run in guide tracks from
top to bottom.
Undoing the mounting pin
When pushed in, the mounting pin (2) locks automatically. To undo the mounting pin
(2), push the tab washer (1) upwards and pull out the mounting pin (2).
Drive adapter for obstacle detection
If you wish to use the "obstacle detection" function, you must use the "drive adapter for obstacle detection".
Assembling the drive adapter with drive adapter safety catch
Put the drive adapter (1) onto the drive shaft of the tubular drive. You can see which
way to insert the safety catch (2) from its shape. When inserting the drive adapter
safety catch (2) into the hole (4), make sure that the locking lug (3) engages. You will
hear a click. Check that the safety catch is securely in position by pulling on the drive
adapter (1).
Assembling the drive adapter with screw connection
Put the drive adapter (1) onto the drive shaft of the tubular drive. For the assembly,
use an M6 x 12 screw (3) with appropriate washer (2) and suitable screw retainer.
Threaded hole (4)
9