Becker P5-B01, Assembly And Operating Instructions Manual

Page: 5 / 20

• Crushing or shearing points must be avoided or protected.
• When installing the drive, all-pole disconnection from the mains with a contact gap of at least 3 mm per pole
must be provided (EN 60335).
• If the drive mains connecting cable is damaged, it must be replaced with the same type of mains connecting
cable, which is available from the drive manufacturer.
Attention
Safety instructions for avoiding property damage.
• Ensure that there is adequate clearance between moving parts and adjacent objects.
•
The drive must not be carried by the mains connecting cable.
• All latching connections and fastening screws on the brackets must be checked to ensure that they are se-
cure.
• Ensure that nothing rubs against the tubular drive, such as shading solution attachments, screws, etc.
Intended use
The type of tubular drive described in these instructions is intended solely for the operation of roller shutters. This type of tubular
drive is compatible with the B-Tronic control program and suitable control units with bidirectional KNX radio.
This type of tubular drive supports not only curtain attachment by means of springs but also mechanical anti-lifting devices (e.g.,
Zurfluh-Feller, Simu, GAH Alberts and Deprat). These are detected automatically.
If the springs or the top lath are screwed or riveted to the barrel, a point must be set in the lower limit position.
For sun protection applications, please use only the types of tubular drive designed for this purpose.
This type of tubular drive is designed for use in single systems (one drive per barrel).
The tubular drive must not be used in potentially explosive areas.
The connecting cable is not suitable for transporting the drive. Always carry the drive by the housing tube.
Other applications, uses and modifications are not permitted in order to protect the safety of the users and others, since these ac-
tions can impair the system’s safety and carry the risk of personal injury and property damage. The drive manufacturer does not
accept liability for damages or injury arising from such actions.
Always observe the information in these instructions when operating or repairing the system. The drive manufacturer does not ac-
cept liability for damage or injury resulting from improper usage.
Attention
Only use anti-lifting devices if the roller shutter laths are sufficiently strong. The closed curtain must not pro-
ject beyond the guide tracks or else there is a risk of the joint between the top two laths being subjected to ex-
cessive strain and getting damaged.
5