Becker P5-B01, Assembly And Operating Instructions Manual

Page: 3 / 20

General
These tubular drives are high-quality products with the following features:
•
Optimised for roller shutter operation
• Can be operated with any suitable KNX transmitter
• Individual, group and central radio control
•
No need to run wires to a switch or relay control device
• Any combination of drive and transmitter possible
•
Simple to set the limit positions with the transmitter
• Installation without stops possible (from upper point to lower point)
• Two freely selectable intermediate positions can be set
•
Flexible radio grouping; can be altered at any time with no need to install/uninstall
• Integrated memory function facilitates easy programming of one or two switching times on daily repeat.
• Automatic detection of the lower limit position when using springs in conjunction with the "drive adapter for obstacle detection"
•
Automatic detection of limit positions thanks to intelligent electronic system with stop systems
• Obstacle detection, even when using anti-lifting devices (axle shaft devices)
∙
Secure anti-lifting device
∙ Slight pressure applied to the roller shutter curtain makes it difficult to raise or reach under it
∙ Suitable for rigid aluminium, steel and wooden profiles
•
The limit positions do not have to be reset: Changes in the shading solution are accommodated automatically when using stop
systems.
• Torque control in the up direction prevents damage to the roller shutter in the event of a frozen or blocked shutter
•
Anti-freeze mechanism in the upper limit position can be enabled
• Considerably lower stop load, and thus considerably lower shading solution load.
•
Smooth operation of the system and the drive increases the service life
• For plug-in connecting cable
• Fly screen protection function
Please observe these Assembly and Operating Instructions when installing and setting the equipment.
The date of manufacture comes from the first four digits of the serial number.
The numbers 1 and 2 indicate the year and the numbers 3 and 4 indicate the calendar week.
Example: 24th calendar week in 2012
Ser. No.: 1224XXXXX
Explanation of pictograms
CAUTION CAUTION indicates a hazardous situation which, if not avoided, could
result in injury.
ATTENTION ATTENTION indicates measures that must be taken to avoid damage to
property.
Denotes user tips and other useful information.
Warranty
Structural modifications and incorrect installation which are not in accordance with these and our other instructions can result in
serious injuries, e.g., crushing of limbs. Therefore, structural modifications may only be carried out with our prior approval and
strictly in accordance with our instructions, particularly the information contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intended use is not permitted.
The end product manufacturer and fitter have to ensure that all the relevant current statutory, official and, in particular, EMC regu-
lations are adhered to during utilisation of our products, especially with regard to end product manufacture, installation and cus-
tomer advice.
3