Becker MAP PILOT Instructions For Use Manual Download | Manualshive

Page: 59 / 62

background image

58

NOTICE

>>>

> USE

> FR

> ES

NOTICE

FCC Information

This device complies with the Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.

The type approval

In conformance with current EC guidelines, any person may operate this unit. This unit con-
forms to the current valid European or harmonised national standards. This designation is
your guarantee that the unit conforms to the applicable specifications regarding electromag-
netic compatibility. This means that interference with other electrical/electronic devices
caused by the unit, or interference with this unit caused by other electrical/electronic devices
is largely prevented.

The EC type approval mark (E13) issued by the Luxembourg's vehicle licensing authority in
accordance with European Directive ECE-R10 governing the EMC of motor vehicles in its
current version authorizes installation and operation of the unit in motor vehicles (classes L,
M, N and O).

«
...
57
58
59
60
61
...
»

Summary of Contents for MAP PILOT































































Reviews:

No comments

Related manuals for MAP PILOT

Brand: Garmin Pages: 2

Brand: Garmin Pages: 2

POCKET LOOX N100 series

Brand: Navigon Pages: 2

Brand: Navigon Pages: 180

Brand: Navig8r Pages: 55

Brand: e2Link Pages: 20

Dakota 20 - Hiking GPS Receiver

Brand: Garmin Pages: 6

Brand: Garmin Pages: 96

Brand: Garmin Pages: 100

Brand: BeeWi Pages: 2

Brand: SkyGolf Pages: 52

Brand: MikroTik Pages: 19

Brand: Garmin Pages: 43

Brand: VKB-Sim Pages: 2

Brand: Command GPS Pages: 2

Brand: Javad Pages: 152

Brand: Becker Pages: 85

Brand: Spypoint Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands