Operating Instructions
30
Connection as a drive controller
Tubular drive
L
N
PE
green/yellow
blue
black/brown
brown/black
2. Put the protective caps back on the power supply unit.
3. Fix the power supply unit in the box.
4. Put the operating device in the frame and plug it into the power supply unit.
Warning
• Risk of injury by electric shock.
• Terminal connections must be carried out by an authorised electrician!
• If more than one drive is controlled using the TC42, the drives must be
decoupled by relay controls. This decoupling is not applicable to Becker drives
with electronic limit stop.
Always observe the switched current of the device.
1. Connect the power supply unit to the TC42 as follows:
