Normal/master mode
The transmitter can be operated in two modes:
•
Normal mode
(normal operation) The commands that are issued apply
to
all
the receivers of a channel.
•
Master mode
(Setting mode for all B‑Tronic products) The commands
issued apply exclusively to
one
selected receiver of a channel.
The normal mode is set at the factory.
Activating master mode
Press the master button until the changeover button
flashes
green once per second. This flashing will continue as long as you remain in
master mode.
By pressing the master button again, the programmed receiver is selected, or
the programmed receivers are selected in sequence.
The selected receiver confirms.
You can now make the various settings that are only available in master mode.
When all the desired settings have been made at this receiver, you can press
the master button again to select the next receiver for programming.
Leaving master mode
There are two ways to leave master mode:
1.
Press the changeover button
2.
Master mode is automatically closed once 2 minutes have gone by
without a button being pushed
8
